3M Fit Test Adapter 601, paquete de 1, prueba de ajuste de respirador reutilizable, OSHA

Everything needed to adapt a 3M respirator Including an adaptor, plastic tubing, suction cups, and a retainer clip, this respirator fit test adaptor kit has everything you need to enable your 3M respirator to perform a quantitative fit test (QNFT) with certain sampling instruments, such as a TS PortaCount system. Easy to install Whether you're testing a 3M half facepiece or a 3M full facepiece respirator with a bayonet style cartridge/filter connection, this adaptor allows you to easily thread the plastic tubing through the inhalation valve into the interior of the facepiece. This enables the sampling instrument, such as a TSI PortaCount Respirator Fit Tester, to measure the test agent concentration inside the respirator. Other requirements Quantitative fit testing requires the use of P100 particulate filters. 3M Particulate Filters are not included and must be purchased separately. The 3M Fit Test Adapter 601 is compatible with bayonet style filters including the 3M Particulate Filter 2091, P100 and 3M Particulate Filter 7093 Series, P100. OSHA fit testing requirements OSHA regulations require workers who need to wear a tight-fitting respirator to undergo a fit test prior to initial use of the respirator to determine adequacy of the respirator fit. Fit tests must also be conducted annually, or sooner if there is any change in a worker’s physical condition that could affect the fit. Changes in physical condition include significant changes in body weight, facial surgery, or major dental work. Refer to OSHA Regulation 29 CFR 1910.134 for full list of requirements.

Úselo para realizar pruebas de ajuste cuantitativo (QNFT) en respiradores reutilizables 3M con ciertos instrumentos de muestreo, como un probador de ajuste de respirador TSI PortaCount Diseñado para ser utilizado con las medias piezas frontales 3M 6000, 6500/6500QL y 7500, y piezas frontales completas 6000, FF-400 y 7800 Series Se requieren pruebas de ajuste cuantitativas para obtener un factor de protección (APF) asignado por OSHA de 50 para las piezas frontales completas en modo de purificación de aire a presión negativa Las pruebas de ajuste deben realizarse según el Reglamento OSHA 29 CFR 1910.134 - Apéndice A Contenido del paquete: adaptador, tubo de plástico, ventosas y un clip de retención Solo para uso laboral/laboral. No apto para venta o uso al consumidor

• 🚚 Envío rápido
• 🔒 Pago seguro
• 🛡️ Garantía incluida
• 💬 Soporte por WhatsApp