CTS taot Custom Corto Split Shaft de 500K audio taper Potindividual 1×10 de tolerancia450G

Descripción
We are pleased to offer our own custom branded pots manufactured by CTS. These TAOT Custom Series pots are identical in construction to CTS high quality 450G series pots made specifically for guitars. These audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are: 500K Ohms/10% Tolerance Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/8″ (short shaft) bushing height Split, fine 24-tooth, knurled, 1/4″ diameter shaft Chamfered shaft for easier knob installation and removal Each pot comes with hardware – nut, dress washer and lock washer Requires 3/8″ diameter mounting hole Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500K TAOT. Great pots at reasonable price and you can only get them here. Note: 1. If you are uncertain whether your guitar uses short (3/8 inch) or long (3/4 inch) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul’s manufactured before 1977, Gibson historic reissues, PRS and Hamer guitars, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you’ve ever had that happen… 3. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.
Características
TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT Short Split Shaft (3/8″ Height X 3/8″ Diameter Bushing) 24 Tooth Fine Spline .236″ Diameter Shaft 10% Tolerance Audio Taper suitable for both Volume & Tone controls
El número de Modelo (ItemModelNumber)
450S500K TAOT
Peso
0.81 onzas
Dimensiones
1.25 x 1.25 x 1 pulgadas
Destacados
TAOT CUSTOM Series Pots -High Quality Brass Bushing & Brass C-clip reinforced Shaft Part #450S500K TAOT, Short Split Shaft (3/8″ Height X 3/8″ Diameter Bushing), 24 Tooth Fine Spline .236″ Diameter Shaft, 10% Tolerance, Audio Taper suitable for both Volume & Tone controls
La calificación que le dan a CTS taot Custom Corto Split Shaft de 500K audio taper Potindividual 1×10 de tolerancia450G, 74 usuarios es de 4.5 sobre 5 estrellas.